Terms and Conditions
Perfect Brakes Inc. are a Nevada Corporation
Please read the following terms and conditions of sale carefully before ordering products from us. By purchasing products from us, you agree to these terms of sale.
In these terms, "you" and "your" refer to the customer and "we", "us" and "our" refer to Perfect Brakes Inc. The term “website” refers to the Perfect Brakes Inc. website.
1. Order Acceptance
1.1 A contract for the sale of product(s) you order from us is only created once we have dispatched your goods to you. A confirmation of your order will be sent prior to this, but it is not an acceptance of order, we are merely confirming the order details that you have requested and indicating a likely dispatch date for those items. Orders are subject to availability.
Whilst every effort is made to ensure the data contained on the website is correct, we will not be legally bound by any factual or typographical errors on the website or other promotional materials.
1.2 Cancelling Orders
Should you wish to cancel your order with us, you can do so by sending an email to firstname.lastname@example.org. You must quote your order reference number on ALL correspondence, you also need to include your name, home address, delivery address of the goods if different to home address, contact details and a description of the items to be cancelled or state whole order.
As long as your order has not been shipped, there will be no cost to you.
1.3 Refusal Of Orders
We reserve the right to refuse any order without providing any justification.
2.1 The prices shown on the web site show exclude any applicable sales tax.
2.4 Once the goods have been delivered to you, you will hold them at your own risk and will be liable for their loss or destruction.
3.1 When paying via credit card or debit card, payment will not be taken until we are ready to dispatch your goods.
3.2 If you have paid via credit card or debit card for multiple items and an item or items are out of stock and the estimated delivery date is not acceptable for one of the items the value of the item will be credited back to the card that the initial payment was taken from.
3.3 Goods remain the property of Perfect Brakes Inc. until they are paid for in full.
3.4 ANY ATTEMPT TO FRAUDULENTLY MISUSE ANY FORM OF PAYMENT WILL BE REPORTED TO THE RELEVANT AUTHORITIES, IN THE RELEVANT COUNTRY, IMMEDIATELY. WE WILL ASSIST THE INVESTIGATING PARTIES IN EVERY FORM POSSIBLE.
4.1 All USA deliveries should be dispatched within 24 hours from point of order. This is providing that your preferred payment method has cleared the necessary funds at time of order. If an order is placed outside of our normal business hours, then the delivery time will start from the next working business day. That is, if an order placed on Saturday, the order will be sent the following Monday.
4.2 Where goods are not in stock, customers will be notified in the first instance via email, with an estimated date of delivery. If this estimated delivery date is acceptable to you, your order will be processed as normal once we have your
5.1 Shipping Damage
If you find that the goods appear to have been damaged during shipping, you must notify us in writing within 5 days of delivery.
No shipping damage claims will be accepted after 5 days of the goods being delivered.
This can be via email, letter posted to our address or by fax. You must quote your order reference number on ALL correspondence, you also need to include your name, home address, delivery address of the goods if different to home address, contact details and a description of the damage to which items ordered.
Once we have received this written confirmation, we will arrange a mutually convenient time and date to collect the goods. Once the goods have been delivered to us, we will complete an inspection. After confirmation of your claim we will either refund your payment or arrange for a replacement item to be shipped to you. Subject to sufficient shipping insurance cover.
5.2 Delivery Insurance
In relation to point 5.1:
Where it has been proven that the courier company is responsible for the loss or damage to your goods, they will only be responsible up to the level of insurance you have specified. Perfect Brakes Inc. will not be liable for any difference between your chosen insured value and the value of the goods ordered or value of the goods delivered.
5.3 Incorrect Item Ordered
If you have incorrectly order the wrong item for your car, bike, kart or mountain bike, we can exchange the goods for the correct ones.
This will be subject to a minimum restocking fee of 20% of the goods value. Product boxes that have been opened cannot be re-sold to the public. You will also be responsible for shipping the goods back to us and for the shipping of the correct goods back to you. If there is a difference in price for the correct goods you will be charged or credited, depending on the prices. Any goods deemed to be incorrect in any way you must notify us within 30 days from the date of the invoice. No exchanges or refunds will be given after this date.
5.4 Incorrect Goods Shipped
If we have incorrectly sent you the wrong goods, i.e. the product code that you have ordered, does not match the product code of the item that you have received, we will arrange for collection of the goods and replace with the correct item free of any charges.
We will also offer you FREE shipping (to the same delivery address) on your next order by way of apology. Any goods deemed to be incorrect in any way must be notified to us within 30 days from the date of the invoice. No exchanges or refunds will be given after this date.
5.5 Unwanted Items
Goods purchased from us which are now no longer required may only be returned to us within 7 working days from the date of delivery. Within this time frame unwanted items can be return to us.
5.6 Faulty Goods
Should products arrive which are clearly faulty you should contact us in writing within 5 days of delivery.
We will accept no faulty goods claims after 5 days of the goods being delivered. This does not affect your warranty with the original manufacturer.
This can be via email, letter posted to our address or by fax. You must quote your order reference number on ALL correspondence, you also need to include your name, home address, delivery address of the goods if different to home address, contact details and a description of the faulty item ordered.
Once we have received this written confirmation, we will arrange a mutually convenient time and date to arrange collection of the goods to us. Once the goods have been delivered to us, we will complete an inspection. After confirmation of your claim, we will either refund your payment, or arrange for a replacement item to be shipped to you.
If replacement parts are required urgently a new payment transaction must be taken before we can send the new parts. Once the original faulty goods are back and have been inspected a refund will be made to the credit card used.
Goods sold from Perfect Brakes Inc. are subject to the original manufacturers warranty terms and conditions.
Warranty is invalid if product is used for racing, trackday experience or any other form of competition. There is absolutely no warranty on any EBC product for race use.
AUTOMOTIVE - This is a 12 month warranty from date of delivery or a maximum 10,000 miles usage. The warranty will expire, irrespective of mileage, after a period of 12 months from date of delivery.
MOTORCYCLE - This is a 12 month warranty from date of delivery or a maximum 5,000 miles usage. The warranty will expire, irrespective of mileage, after a period of 12 months from date of delivery.
For ALL warranty claims the customer is responsible for returning the goods back to us. We recommend using an insured and signed for delivery service.
Warranty covers defects in materials or workmanship only. Warranty is for replacement of similar product or refund of purchase value only, excluding all labour and ancillary charges such as collection, fitting, inconvenience, purchasing of other manufacturers products.
For ALL warranty claims you must contact us prior to sending any goods back. This can be via email, letter posted to our address or by fax. You must quote your invoice number on ALL correspondence, you also need to include your name, home address, delivery address of the goods if different to home address, contact details and a description of the warranty issue.
Once we have supplied you with a RTN number and emailed you the returns procedure you can then send the goods back to us. Once the goods have been delivered to us, we will complete an inspection which will take between two and four weeks. After confirmation of your claim, we will either refund your payment, or arrange for a replacement item to be shipped to you.
If replacement parts are required urgently a new payment transaction must be taken before we can send the new parts. Once the original faulty goods are back and have been inspected and have proven to be faulty a refund will be made to the credit card used.
AUTOMOTIVE ROTOR WARRANTY
Due to a new policy by EBC Brakes (the manufacturer) we, Perfect Brakes Inc., advise you that the following conditions must be met in order for any automotive rotor warranty claim to be considered.
When fitting new rotors to your car we strongly advise that you use a Pro Cut Lathe to ensure that the rotors are running “true” to your car’s wheel hub. This will ensure that the rotors are perfectly aligned to your car. Pro Cut Lathe centers can be found here: http://www.procutinternational.com/ProcutRepSearch.aspx
If you ignore this advice and then appear to suffer “judder” issues which commonly occur after 2,000 to 4,000 miles then you will have to take your car to a Pro Cut Lathe center and have the rotor skimmed / aligned correctly to correct this DTV (Disc Thickness Variation) or “black spotting of the rotor”.
If you experience judder in the very first 500 miles or so, you either have a severe problem with your wheel hub alignment or the rotors have not been installed correctly due to excessive rotor run out.
There are no exceptions to the above rule. EBC Brakes will not entertain a warranty claim unless the rotors have been on a Pro Cut Lathe either at the time of fitting or if a problem occurs. Proof of this will be required, eg copy of invoice.
Detailed explanations of “DTV” and “black spotting of the rotor” are below.
DTV (Disc Thickness Variation)
DTV develops in a car after 3000-4000 miles and is caused by run-out built in to the car or due to incorrect alignment of the rotors at install. This is a common fault on modern cars and many cars require a visit to a Pro Cut Lathe center at every rotor change. Hub distortion is often confused with a rotor quality issue but in 99% of cases the DTV is a problem with your vehicle and not a rotor quality problem.
When new brake rotors are installed it is essential that they run true. All EBC Brakes rotors are manufactured and inspected to have less than 0.002 inches (.05mm) of run out. If after your new rotors are installed they have more than this amount of run out, then there is most likely a run out problem on your car.
Even a small amount of dirt or scale can increase run out figures to five times the factory limit. After installing the rotors and tightening them using correct procedures by tightening wheel nuts diagonally with a torque wrench (not an airgun) it is important to take a few minutes to check rotor run out with a dial gauge. If you do not correct distortion above 0.004 inches (0.1mm) at this point you will almost certainly experience brake judder within a few thousand miles.
The point at which this thin spot or DTV will occur depends on how regularly or irregularly the brakes are applied. For example, if you drive 50 miles to work every day and hardly touch the brakes, it could appear as quickly as 500 miles. The reason for this is that regular use of the brakes tends to wear the whole surface of the brake rotor at the same time whereas driving the vehicle “off the brake” causes an intermittent contact between the pad and the high spot on the rotor wearing this high spot down and causing DTV.
You could replace the rotors many times trying to solve vibration and the problem will only go away for a few thousand miles and then return. You may have purchased new rotors in good faith but the problem is not solved and will reoccur until you have your rotors skimmed with a Pro Cut Lathe. After skimming the rotor surface you will have smooth, more effective brakes and ZERO vibration. It is a worthwhile practice when fitting new rotors to have all four rotors skimmed into perfect alignment on your car with this inexpensive procedure.
Black Spotting of the disc
The second cause of brake vibration is black spotting of the rotor. This is caused by the rotor over heating and a hard spot occurring intermittently around the rotor surface. In technical terms this is the formation of cementite which is a very hard by-product of cast iron (rotor material) caused by over heat and sudden cooling. If black spotting occurs the only solution is to replace the rotor or have it skimmed. Black spotting is caused by the rotor wearing too thin (having been skimmed more than once) or by brake pads that are ineffective in balancing rotor and pad temperatures. Brake pads need to have good “thermal conductivity” to take the heat away from the rotor, optimum “compressibility” to allow the brake system to absorb or dampen minor vibrations and optimum “scrub factor” – this is the ability of the pad to hone out minor surface imperfections on the rotor as they occur without wearing the rotor excessively. EBC Brakes pads are designed to be used with EBC Brakes rotors.
No warranty is offered when a non-EBC pad is used with an EBC rotor.
5.9 Incorrect Quantity Delivered
For discrepancies regarding quantity you must notify us in writing, by email, fax or post within five days of delivery.
You must quote your order reference number on ALL correspondence, you also need to include your name, home address, delivery address of the goods if different to home address, contact details and which items are missing.
We shall then investigate your claim with the courier company concerned.
Providing your claim is of a genuine nature, we shall at your option either refund the cost of the item/s or send the item/s to you at no cost to you.
5.10 Credits / Refunds
Refunds will be made back to the original payment method within 30 days of receiving the goods back to us. Once we have processed a refund you will receive a “credit note” via email or post if no email address is available. The refunded amount will be back in your account / on your card within 2 to 5 working days from the date of the credit note depending on your bank.
5.11 ANY CLAIMS WHICH PROVE TO BE FRAUDULENT WILL BE REPORTED TO THE RELEVANT AUTHORITIES IN THE RELEVANT COUNTRY IMMEDIATELY. WE WILL ASSIST THE INVESTIGATING PARTIES IN EVERY FORM POSSIBLE.
6. Your Privacy
Your details that we hold are; Your name, home address, delivery address, contact details and purchase order history. This data will not be disclosed to any third parties, unless required to do so by law.
We will occasionally email you with news of special offers. This will happen no more than, 4 emails per year. Should you wish not to receive these messages, you will be able to remove yourself from this subscription.
This information is held on our servers, securely, behind a "Firewall" at our Internet Service Provider.
We do not share or sell any data that we collect.
We would only disclose information regarding your data, if the relevant authorities have sufficient legal rights to do so.
"Per-session" cookies are used on this site to maintain your cart and login during your visit. "Per-session" cookies are small text files that are placed on your hard drive by this website and are removed when you close your browser. These cookies contain a unique string, but do not contain any personally identifiable information. By clicking "log out", or by closing your browser, the cookie will be marked as expired. A new cookie will be created when you re-visit the web site.
External Links contained within Perfect Brakes Inc.: this web site may contain links to other sites.
7. Web Site
7.1 Perfect Brakes Inc. cannot be held responsible for any content, of any of the external links provided, in any way what so ever.
7.2 You must not misuse our Website by knowingly introducing worms, logic bombs, viruses, trojans, running any scripts of any kind without our consent or other material which is malicious or technologically harmful. You must not attempt to gain unauthorized access to our Website, the server on which our Website is stored or any server, computer or database connected to our Website. You must not attack our Website via a denial-of-service attack or a distributed denial-of service attack.
By breaching this provision, you may be committing a criminal offence under the Computer Misuse Act 1990. We will report any such breach to the relevant law enforcement authorities and we will co-operate with those authorities by disclosing your identity to them. In the event of such a breach, your right to use our Website will cease immediately.
To the maximum extent permissible by law, we will not be liable for any loss or damage caused by a distributed denial-of-service attack, viruses or other technologically harmful material that may infect your computer equipment, computer programs, data or other proprietary material due to your use of our Website or to your downloading of any material posted on it, or on any website linked to it.
All guarantees for products are provided entirely by the manufacturers/UK importers and are subject to terms contained therein. Purchasers are reminded to complete all warranty cards/documents upon receipt of goods where appropriate.
9. Liability and Disclaimer
9.1 So far as the law permits, we disclaim all representations, terms, conditions and warranties (including those relating to satisfactory quality, merchantability, fitness for a particular purpose, title, non-infringement and freedom from computer viruses) relating to products provided to you by us.
9.2 So far as the law permits, we will not have any liability to you (whether or not caused by negligence) relating to products provided to you by us for any indirect, special, incidental or consequential damages. This includes loss of data, loss of income or profit, loss of goodwill, damage to reputation, damage to computer software and other computer or storage systems.
9.3 We will have no liability to you if you sell on any products provided to you by us, including without limitation, any liability to third parties for defective products.
9.4 Whilst every effort has been made to give accurate application information, Perfect Brakes Inc. Ltd are not responsible for claims or costs arising from non-fits (parts supplied do not fit your car, bike, mountain bike or kart). No claims for Labour charges will be entertained.
9.5 All items sold are packed and sealed by the manufacturer. Perfect Brakes Inc. Ltd is not responsible for any losses or costs incurred directly or indirectly, as a result of defective parts or incorrect parts contained within the product boxes.
10. Force Majeure
We will not be held responsible for any failure to deliver goods ordered by you or any delay in delivering goods ordered by you or any damage to goods ordered by you, the cause of which is any event or circumstance beyond our reasonable control.
In the event that any clause in this contract is deemed to be unenforceable, the enforceability of any other part of these conditions will not be affected.
All designs, text, graphics and their selection and arrangement on this site are the copyright of Perfect Brakes Inc. or its content providers. As a visitor to the Perfect Brakes Inc. web site you are licensed to copy electronically or to print portions of this site for your own personal, non-commercial use. Any other use of materials on this site without Perfect Brakes Inc. prior written consent is strictly prohibited.
We respectfully acknowledge any copyrighted term, make or model of any of the manufacturers of the Automobiles, Motorcycles, Karts and Mountain Bikes listed within the catalog data as being their copyright.
13. Entire Agreement
13.1 This Agreement supersedes all prior agreements, arrangements, warranties and understandings between the parties and constitutes the entire Agreement between them relating to its subject matter.
13.2 These terms and conditions cannot be varied except in writing signed by an authorized person at Perfect Brakes Inc.
13.3 Nothing said or any representation made by any employee, including but not limited to our telesales staff, should be understood as a variation of these terms and conditions of the sale or as an authorized representation about the goods provided. Our disclaimer of liability shall include but not be limited to misleading and untrue representations but shall not include fraudulent misrepresentations.
14. Governing Law and Jurisdiction
This Agreement will be governed by and construed in accordance with US law.
14.1 Where these terms and conditions have been translated into a language other than English, any conflict or inconsistency in the translation, the English language version shall prevail at all times.